Design & Production
Small part prototyping
Small batch production
Laser part marking
Laser cut soft materials
Laser cut thin metals
Laser engraving service
CNC cut components
CNC engraving service
Resin cast products
Carbon fibre production
Composite materials
Wooden box building
Soft mould production
Door signs and plaques
Exotic wood stabilisation
Decorative trinket boxes
Bespoke custom gifts
Please be advised that due to Illness, my current work load and health limitations the lead times for all items have been increased, all orders for Pre-Order (Bespoke) items are currently being worked on by date order where possible and some items may be delayed by up to 14-28 working days (Excluding Weekends), I will however make my best efforts to satisfy all orders in a timely manner, If you feel your order is overdue please use the contact page or send an email to p.abbott@vaporpuffin.co.uk and I will respond asap, stay safe all.
A set of replacement V2 Flat 3.4mm Scales to fit the Spyderco UKPK 3 Pin in resin stabilised natural Oak.
Cnc cut & hand finished to achieve a perfect fit and feel,
These are my newly designed V2 Flat Scales that incorporate 3.4mm Scales with all edges round over and the face is sanded to 2000 grit and sealed with shellac before receiving a light polish,
The Wood used in these Scales is English Oak, It has been Kiln dried and resin stabilised before being laminated onto 1mm dark coloured Linen Micarta liners for strength and durability ,
The Scales are supplied with a concentric cam for back spring adjustments,
The Scales come with Polished edge copper Liners and a polished Copper Castellated bottom spacer,
All these improvements give the scales a more traditional feel and fit,
The belt clip pockets have been cut on the right hand Scale,
After cutting the Scales are hand sanded to 1000 grit then given several coats of Shellac to seal the ends of the fibres prior to a final sand to 2000 grit and a light polish.
These Scales will be manufactured in small batches and sold from stock so no pre-orders necessary,
The Scales use the existing hardware and are supplied with 2 x 0.2mm phosphor bronze washers,
The screw holes are D shaped to take the D shaped barrel pins.
Blade and hardware shown for reference (not supplied).
This item is designed for self installation.
Sales@vpcreations.co.uk