Boker Tech Tool Scales in various woods and colours

A set of replacement scales for the trusty Boker Tech Tool 1/2/3/4 in an assortment of resin stabilised woods (Choice of woods and colours),

Cnc cut & hand finished to achieve a perfect fit and feel,

Tech tool 2/3/4 will have the cut out for the cork screw or Screw driver,

Will be supplied with Belt clip holes as a selectable Option,

Available with a flat face in 3.2mm & 5mm with either a flat ground edge, chamfered edge or round over edge or Curved face in 3.2mm & 5mm as original,

Available with a selection of finishes

Mill finish, straight off the Cnc with all sharp edges removed ready for self finishing,

Dressed Finish, All surfaces faced off to remove any blemishes or tool marks and finished off with a fine scotch pad,

Polished, same as dressed but finished with a fine polishing wheel,

"2k Clear coated, same as dressed but finished with a 2k clear coat acrylic finish .

Available with a selection of side profile finishes

Side profile flat ground,

Side profile with a 1mm Chamfer,

Side profile with a 2mm Round over,

Uses existing hardware so no fittings supplied,

This item is designed for self installation.