Manix 2 Scales (Stabilised Hard woods)

A set of replacement scales to fit the Spyderco Manix 2 in 2.75mm Resin stabilised Hard Woods.

(Photo's to follow)

(Please note these Scales are Made to order and can take 14-21 working days to despatch)

Cnc cut & hand finished to 2.75mm as original Scales to achieve a perfect fit and feel,

Available Materials :-

Plain or coloured Maple in Plain, Spalted, Birdseye or Burl,

Namibian Rosewood,

English Oak,

Walnut,

Root Walnut,

LP Chana (London Plain),

and various other woods on request.

Available finishes :-

• Matt finish :- (edges de-burred and ground with the surface dressed to 1000 grit to achieve a fine matt finish, ).
• Polished stage 1 :- (edges de-burred and ground then hand sanded to 1000 grit finished with a polished via a rotary mopping wheel to remove all but the lightest scratches and blemishes, may require further hand polishing for perfect finish before installation).
• A 2k Clear coat gloss finish can be applied to achieve a higher Gloss level and for greater durability,
• Peel Ply (Lightly Dimpled to give added grip ) Finish
• Side profile finish selectable from Flat grind, 1mm Chamfered or 2mm Round over,

Will be supplied with Belt clip position as standard (depending on the variant selected) with the option to have the belt clip on a single side left or right But End,

Can be supplied with a full length Spring carrier/back spacer as found below

Blade shown for reference (not supplied).

This item is designed for self installation.