UKPK 3 Pin V2 Ergo 5mm Scales in 6k 3x2 Twill Carbon Fibre (with Blood Red bonded Liners) Gloss finish

A set of replacement V2 Ergo 5mm Scales to fit the UKPK 3 Pin in 6k 3x2 Twill Carbon Fibre (with Blood Red bonded Liners) Gloss finish

These are my newly designed V2 Ergo Scales that incorporate 5mm Scales with all edges round over and the face is curved with finger grooves added on the belly to help with unrestricted opening,

All these improvements give the scales a more traditional feel and fit,

Belt clip pockets are cut for right hand operation.

The Scales are hand sanded to 1000 grit then the Scales are given several coats of 2K clear coat acrylic lacquer prior to a final buff & Polish .

The Scales are produced with 1mm Blood Red bonded Micarta Liners incorporated into the Scales to add to the strength and rigidity,

The Scales use the existing hardware and are supplied with 2 x 0.2mm phosphor bronze washers,

A concentric Cam will be supplied for adjusting the back spring tension and a brass locking washer will be supplied for the Pivot D Pin along with phosphor bronze washers,

The screw holes are D shaped to take the D shaped barrel pins.

Blade and hardware shown for reference (not supplied).

Black Ceracoated Bottom Spacer shown for reference only (not Supplied) however they can be purchased from the Accessory page ,

This item is designed for self installation.